Ford

How to Program Key Fob “Ford Fiesta”

by

[svp]http://www.youtube.com/watch?v=Yvv8CavULJ8[/svp]
I will show you how to program your key fob. How the program key to lock and unlock the car doors.

Any time the key is replaced the keyless entry transmitter has to be reprogrammed to the car and on this one, no scan tool is needed

Subscribe to my youtube channel here: https://goo.gl/j1pCfn
For the most common automotive fixes to the most common car and truck problems. DIY auto repair to help you save money.

Connect with me:
Website: https://flatratemechanic.com
Facebook: https://www.facebook.com/groups/diyrepair
Twitter: https://goo.gl/mmpqts
Instagram: https://goo.gl/NCjRhM

Check out The Flat Rate Mechanics Tool Store on Amazon https://goo.gl/M8MpdC

For Promotional offers, consulting, training, sponsorships or other inquiries contact me at FlatRateMechanic1@gmail.com

The Flat Rate Mechanic. 26-year ASE Master Automotive Technician and Advanced level ASE certified here to help you save money on your automotive repairs

The Flat Rate Mechanic is a participant in the Amazon Influencer Program.

Disclaimer:
Due to factors beyond the control of The Flat Rate Mechanic, it cannot guarantee against unauthorized modifications of this information or improper use of this information. The Flat Rate Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this automotive repair video. The Flat Rate Mechanic recommends safe practices when working on cars or trucks with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this repair video. Due to factors beyond the control of The Flat Rate Mechanic, no information contained in this automotive repair video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained.

6.0 Powerstroke hard start no start “Oil Cooler gasket Everywere”

by
6.0 Powerstroke hard start no start

 

6.0 Power Stroke hard start no start diagnostic. I could not believe what I found on this Ford 6.0l Powerstroke. Came in for a hard start and a cylinder misfire and what unfolded was nothing like I have seen.

Check out The Flat Rate Mechanics Tool Store on Amazon https://goo.gl/M8MpdC

Subscribe to my youtube channel here: https://goo.gl/j1pCfn

https://flatratemechanic.com/index.php/2018/11/14/6-0-powerstroke-fuel-injector-replacement-tips-and-tricks/

https://flatratemechanic.com/index.php/2018/11/12/6-0l-ford-power-stroke-engine-misfire-diagnostic-p0300/

“Reduced Engine Power Message on Dash GMC Ford Chrysler “Heres What to Do” p2101″ on YouTube

by

In this video, I will show you what to do if the reduced engine power message illuminates in your dash. This works on most vehicles with electronic throttle control.

If you are driving along and the reduced engine power message illuminates in your dash you should pull over turn the key off and restart it and you should be able to continue driving normally until you can get your vehicle brought in to get looked at.

 

In many instances, you can just have the throttle body cleaned and relearned or disconnect the battery to relearn the throttle and in most cases that will fix the reduced engine power message in the dash.

This seems to be a very common problem on a lot of newer vehicles and fortunately, just by cleaning the throttle body a lot of case lot of times it will take care of this problem without having to replace any parts.

Reduced Engine Power

If you have a Nissan you will need to watch my other video on throttle relearn. Because after cleaning the throttle body on most Nissan the idle relearn must be done. That video is here: