[svp]http://www.youtube.com/watch?v=RheeXF8xmzk[/svp]
Categories
Trick to make any belt stop squeaking
DIY Auto Repair Auto CodesAutomotive Fixes to the most Common Trouble Codes.
DIY Auto Repair Auto Codes
[svp]http://www.youtube.com/watch?v=RheeXF8xmzk[/svp]
74 replies on “Trick to make any belt stop squeaking”
Lol it flew right off
What’s the trick ???
Why do you waste our time?
?
😂
Nice
Or you can just replace it.
It didn’t work……….
What is it
Well, it could be useful if we actually knew what you squeezed out of the bottle on to the belt. What was it?
Here’s the best truck.
Cc lean the pulley with a brass brush & brake kleen then install a gates belt
Coat the engine bay with silicone…got it
If it’s the belt that’s squeaking it’s telling you to change it there’s no trick
Dielectric grease works well
Fake
I think you mean continental belt now…
Use a bar of soap
i usually cut the belt if it squeaks and don’t replace it, it’s just gonna squeak again
No no bearing
Replace it? ?
Replace it? 😂
Or take a hammer n beat the Hell outta it
True, that’s why I don’t shower, or wipe my ass
Or try another liquid called : bynadrone , it works better
Dumb asf
or…..peee on it..?
or…..peee on it..😏
Now try that on a v-belt
Use some gaskasinch brushed on the belt and pulleys, let engine idle for 10 minutes or so, stops slipping almost every time, unless it’s just way too loose.
i got a trick. just replace it
How about fixing it the right way? Adjust the tensioner.
Brilliant
@Kevin Nistor right it’s just gonna get shitty again
@Yep yep
Dude you put your caulk on that belt?
Looked like a tube of rtv silicone. There is no fix other than replacing the belt, if it’s actually the belt causing the noise and not an accessory or bad tensioner
Or just buy a new belt
And this is why I’ll never bring my car to a mechanic, you can have a trust what they do and how they perform their duties, it’s all about get the car in and get it the hell out as soon as possible, a real shop would have found out where the squeak was coming from whether it was a pulley or the belt and properly repaired it instead of being a hack low life
Morons…there are so many!
DO NOT PAY ATTENTION to this FOOL!…He’s using Silicone…that will make your belt gummy & it could come off!…REPLACE THE BELT!! OP
People spend more money on “tricks” and “quick fixes” and most the time if they just fixed it right, they’d actually spend less time and money.
Turn the engine off ?
The trick is to put Steven seagals wig on it ???
The trick is to put Steven seagals wig on it 😂😂😂
Or a ?️ candle works to.
Or a 🕯️ candle works to.
Thats rubbish. Get another day job. ??
Thats rubbish. Get another day job. 😂🤣
Stop the motor
A better tip is using stick deodorant instead
Yes I did the same and now oiling belt now stop engine working.?
Yes I did the same and now oiling belt now stop engine working.😟
Lmao
A trick that actually works is using chalk. Not caulk.
Go to another mechanic
I use WD-40
stranded with broken belt wifey’s pantyhose
Ive a better trick,find the cause and correct it.
don’t do that. just have it replaced. it’s time for a new one
Use deodorant stick u fool
Exactly, I said the same thing! They are not even expensive. When it squeaks, it time to replace it or it’s gonna rip apart
Just trying to make it through the day
Im confused
What is that stuff you are using?
Wax. Not just candle. ?
Wax. Not just candle. 😆
Na kutasa powinien sobie wycisnąć. Debil
Just imagine if you had explained anything or even shown what you were using. You almost had a video.
Or just tighten it
Crayon works.
I wish you had tried to grab it with both hands while its running. That would have been a great video.
Not
It’s not even squeezing my guy tf
You could replace the idler or tension pulley or maybe just tighten the belt.